*** Results log of t_1dvar_GRAS_05_bangle (1DVAR GRAS; default) *** ./../tools/ropp_1dvar_bangle -y ../data/IT-1DVAR-05_y.nc -b ../data/IT-1DVAR-05_b.nc --bg-corr ../data/IT-1DVAR-05_c.nc --obs-corr ../errors/ropp_ob_bangle_error_corr_247L.nc -c ../config/ecmwf_bangle_1dvar.cf -o IT-1DVAR-05_bangle.1.nc -d --------------------------------------------------------------------- ROPP Bending Angle 1D-Var --------------------------------------------------------------------- INFO (from ropp_1dvar_bangle): Reading configuration file ../config/ecmwf_bangle_1dvar.cf. INFO (from ropp_1dvar_bangle): Reading observation data for profile 1 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 1 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 83.823 max(relative change in state) = - n_iter = 2 J = 69.641 max(relative change in state) = 0.46569 n_iter = 3 J = 50.972 max(relative change in state) = 1.8945 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Writing 1DVar retrieval for profile 1 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 2 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 2 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 128.32 max(relative change in state) = - n_iter = 2 J = 107.91 max(relative change in state) = 0.90365 n_iter = 3 J = 88.976 max(relative change in state) = 1.3373 n_iter = 4 J = 86.792 max(relative change in state) = 0.45253 n_iter = 5 J = 90.820 max(relative change in state) = 1.3812 n_iter = 6 J = 86.575 max(relative change in state) = 1.1328 n_iter = 7 J = 86.519 max(relative change in state) = 0.14556E-01 n_iter = 8 J = 86.347 max(relative change in state) = 0.25507 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 2 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 3 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 3 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 52.583 max(relative change in state) = - n_iter = 2 J = 43.523 max(relative change in state) = 0.38892 n_iter = 3 J = 31.121 max(relative change in state) = 1.2676 n_iter = 4 J = 30.401 max(relative change in state) = 0.19050 n_iter = 5 J = 31.771 max(relative change in state) = 0.67260 n_iter = 6 J = 30.243 max(relative change in state) = 0.51812 n_iter = 7 J = 30.208 max(relative change in state) = 0.13813E-01 n_iter = 8 J = 30.064 max(relative change in state) = 0.11260 n_iter = 9 J = 30.032 max(relative change in state) = 0.76699E-01 n_iter = 10 J = 30.007 max(relative change in state) = 0.31160E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 10. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 3 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 4 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 4 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 149.71 max(relative change in state) = - n_iter = 2 J = 110.73 max(relative change in state) = 1.4703 n_iter = 3 J = 88.578 max(relative change in state) = 1.4332 n_iter = 4 J = 94.443 max(relative change in state) = 2.1407 n_iter = 5 J = 86.855 max(relative change in state) = 1.5426 n_iter = 6 J = 86.605 max(relative change in state) = 0.14542 n_iter = 7 J = 86.080 max(relative change in state) = 0.40804 n_iter = 8 J = 85.825 max(relative change in state) = 0.92347E-01 n_iter = 9 J = 85.906 max(relative change in state) = 0.29767 n_iter = 10 J = 85.709 max(relative change in state) = 0.97696E-01 n_iter = 11 J = 85.693 max(relative change in state) = 0.54499E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 11. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 4 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 5 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 5 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control removes 1 bending angle data points from the observations as their deviation from the background exceeds 10.0 times the expected (1-sigma) error. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 140.74 max(relative change in state) = - n_iter = 2 J = 112.53 max(relative change in state) = 1.1282 n_iter = 3 J = 85.666 max(relative change in state) = 3.7948 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 5 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 6 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 6 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 467.75 max(relative change in state) = - n_iter = 2 J = 344.94 max(relative change in state) = 9.7235 n_iter = 3 J = 245.10 max(relative change in state) = 3.9823 n_iter = 4 J = 242.77 max(relative change in state) = 1.2060 n_iter = 5 J = 240.58 max(relative change in state) = 0.69670 n_iter = 6 J = 240.05 max(relative change in state) = 0.23428 n_iter = 7 J = 239.51 max(relative change in state) = 0.41215 n_iter = 8 J = 239.00 max(relative change in state) = 0.10525 n_iter = 9 J = 238.78 max(relative change in state) = 0.53695 n_iter = 10 J = 238.63 max(relative change in state) = 0.21434 n_iter = 11 J = 238.43 max(relative change in state) = 0.57709E-01 n_iter = 12 J = 238.56 max(relative change in state) = 0.30442 n_iter = 13 J = 238.25 max(relative change in state) = 0.23537 n_iter = 14 J = 238.26 max(relative change in state) = 0.14779 n_iter = 15 J = 238.07 max(relative change in state) = 0.79061E-01 n_iter = 16 J = 238.16 max(relative change in state) = 0.36619 n_iter = 17 J = 237.86 max(relative change in state) = 0.28018 n_iter = 18 J = 237.93 max(relative change in state) = 0.19018 n_iter = 19 J = 237.70 max(relative change in state) = 0.17840 n_iter = 20 J = 237.77 max(relative change in state) = 0.13270 n_iter = 21 J = 237.73 max(relative change in state) = 0.27090 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 21. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 6 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 7 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 7 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 116.61 max(relative change in state) = - n_iter = 2 J = 97.286 max(relative change in state) = 0.77300 n_iter = 3 J = 78.418 max(relative change in state) = 1.4323 n_iter = 4 J = 77.197 max(relative change in state) = 0.42409 n_iter = 5 J = 76.469 max(relative change in state) = 0.30392 n_iter = 6 J = 76.402 max(relative change in state) = 0.75305E-01 n_iter = 7 J = 76.354 max(relative change in state) = 0.66765E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 7. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 7 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 8 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 8 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 123.21 max(relative change in state) = - n_iter = 2 J = 103.01 max(relative change in state) = 0.76514 n_iter = 3 J = 80.867 max(relative change in state) = 2.3483 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 8 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 9 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 9 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 79.870 max(relative change in state) = - n_iter = 2 J = 67.068 max(relative change in state) = 0.71277 n_iter = 3 J = 56.361 max(relative change in state) = 1.5942 n_iter = 4 J = 58.647 max(relative change in state) = 1.0572 n_iter = 5 J = 55.980 max(relative change in state) = 0.81102 n_iter = 6 J = 55.901 max(relative change in state) = 0.49074E-01 n_iter = 7 J = 55.694 max(relative change in state) = 0.18693 n_iter = 8 J = 55.636 max(relative change in state) = 0.75520E-01 n_iter = 9 J = 55.610 max(relative change in state) = 0.37203E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 9 to the file IT-1DVAR-05_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 10 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 10 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 52.796 max(relative change in state) = - n_iter = 2 J = 44.191 max(relative change in state) = 0.47384 n_iter = 3 J = 34.683 max(relative change in state) = 1.1132 n_iter = 4 J = 34.589 max(relative change in state) = 0.45682 n_iter = 5 J = 33.833 max(relative change in state) = 0.28160 n_iter = 6 J = 33.786 max(relative change in state) = 0.10667 n_iter = 7 J = 33.759 max(relative change in state) = 0.60015E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 7. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 10 to the file IT-1DVAR-05_bangle.1.nc. *** Running IDL to plot results IDL 8.8.2 (linux x86_64 m64). (c) 2022, L3Harris Geospatial Solutions, Inc. Licensed for use by: University of Maryland (MAIN) License: 94891 A new version is available: IDL 8.8.3 https://harrisgeospatial.flexnetoperations.com % Compiled module: PLOT_1DVAR. PLOT_1DVAR: Plotting increments for file_id: 05_bangle % Loaded DLM: NCDF. % Compiled module: NCDF_GETVAR. Processing scenario: BG_20090501000049_UNKN_U999_DMI_ % Compiled module: INTERPOL. Processing scenario: BG_20090501000102_UNKN_U999_DMI_ Processing scenario: BG_20090501000152_UNKN_U999_DMI_ Processing scenario: BG_20090501000623_UNKN_U999_DMI_ Processing scenario: BG_20090501000755_UNKN_U999_DMI_ Processing scenario: BG_20090501001552_UNKN_U999_DMI_ Processing scenario: BG_20090501001716_UNKN_U999_DMI_ Processing scenario: BG_20090501002017_UNKN_U999_DMI_ Processing scenario: BG_20090501002135_UNKN_U999_DMI_ Processing scenario: BG_20090501002245_UNKN_U999_DMI_ Found max difference [%] in observation scenarios: 999900.00 Found max difference [K] in temperature scenarios: -2.6989054 Found max difference [g/kg] in specific humidity scenarios: -0.58987307 Found max difference [hPa] in pressure scenarios: 5.8384232 Generating output image file ropp_1dvar_05_bangle_bangle.jpg % Compiled module: OPEN_JPGFILE. % Compiled module: CLOSE_JPGFILE. % Loaded DLM: JPEG. *** Finished IDL *** ropp_1dvar_05_bangle.jpg can be compared against ../data/ropp_1dvar_05_bangle_reference.jpg