*** Results log of t_1dvar_GRAS_05comp_bangle (1DVAR GRAS; comp factors) *** ./../tools/ropp_1dvar_bangle -y ../data/IT-1DVAR-05_y.nc -b ../data/IT-1DVAR-05_b.nc --bg-corr ../data/IT-1DVAR-05_c.nc --obs-corr ../errors/ropp_ob_bangle_error_corr_247L.nc -c ../config/ecmwf_bangle_1dvar.cf -o IT-1DVAR-05comp_bangle.1.nc -comp -d --------------------------------------------------------------------- ROPP Bending Angle 1D-Var --------------------------------------------------------------------- INFO (from ropp_1dvar_bangle): Reading configuration file ../config/ecmwf_bangle_1dvar.cf. INFO (from ropp_1dvar_bangle): Reading observation data for profile 1 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 1 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 83.508 max(relative change in state) = - n_iter = 2 J = 69.365 max(relative change in state) = 0.45252 n_iter = 3 J = 50.478 max(relative change in state) = 1.8595 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Writing 1DVar retrieval for profile 1 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 2 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 2 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 128.11 max(relative change in state) = - n_iter = 2 J = 107.87 max(relative change in state) = 0.91343 n_iter = 3 J = 89.380 max(relative change in state) = 1.2672 n_iter = 4 J = 87.304 max(relative change in state) = 0.44186 n_iter = 5 J = 91.068 max(relative change in state) = 1.3727 n_iter = 6 J = 87.083 max(relative change in state) = 1.1205 n_iter = 7 J = 87.022 max(relative change in state) = 0.15475E-01 n_iter = 8 J = 86.810 max(relative change in state) = 0.25304 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 2 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 3 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 3 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 52.019 max(relative change in state) = - n_iter = 2 J = 43.056 max(relative change in state) = 0.39134 n_iter = 3 J = 30.837 max(relative change in state) = 1.2711 n_iter = 4 J = 30.175 max(relative change in state) = 0.18342 n_iter = 5 J = 31.411 max(relative change in state) = 0.63221 n_iter = 6 J = 30.016 max(relative change in state) = 0.48290 n_iter = 7 J = 29.980 max(relative change in state) = 0.15164E-01 n_iter = 8 J = 29.842 max(relative change in state) = 0.10959 n_iter = 9 J = 29.851 max(relative change in state) = 0.11644 n_iter = 10 J = 29.804 max(relative change in state) = 0.63951E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 10. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 3 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 4 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 4 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 148.78 max(relative change in state) = - n_iter = 2 J = 110.83 max(relative change in state) = 1.4302 n_iter = 3 J = 88.150 max(relative change in state) = 1.4238 n_iter = 4 J = 94.061 max(relative change in state) = 2.1343 n_iter = 5 J = 86.510 max(relative change in state) = 1.5434 n_iter = 6 J = 86.261 max(relative change in state) = 0.13715 n_iter = 7 J = 85.702 max(relative change in state) = 0.40658 n_iter = 8 J = 85.455 max(relative change in state) = 0.12913 n_iter = 9 J = 85.453 max(relative change in state) = 0.14126 n_iter = 10 J = 85.341 max(relative change in state) = 0.29508E-01 n_iter = 11 J = 85.325 max(relative change in state) = 0.36465E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 11. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 4 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 5 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 5 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control removes 1 bending angle data points from the observations as their deviation from the background exceeds 10.0 times the expected (1-sigma) error. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 142.53 max(relative change in state) = - n_iter = 2 J = 112.23 max(relative change in state) = 1.2587 n_iter = 3 J = 85.479 max(relative change in state) = 3.3601 n_iter = 4 J = 86.404 max(relative change in state) = 0.98027 n_iter = 5 J = 84.449 max(relative change in state) = 0.80728 n_iter = 6 J = 83.840 max(relative change in state) = 0.12660 n_iter = 7 J = 83.561 max(relative change in state) = 0.91261E-01 n_iter = 8 J = 83.450 max(relative change in state) = 0.93782E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 8. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 5 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 6 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 6 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 468.13 max(relative change in state) = - n_iter = 2 J = 344.21 max(relative change in state) = 9.7480 n_iter = 3 J = 244.54 max(relative change in state) = 3.9730 n_iter = 4 J = 241.95 max(relative change in state) = 1.1446 n_iter = 5 J = 239.94 max(relative change in state) = 0.69573 n_iter = 6 J = 239.49 max(relative change in state) = 0.19248 n_iter = 7 J = 238.99 max(relative change in state) = 0.29011 n_iter = 8 J = 238.49 max(relative change in state) = 0.13554 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 6 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 7 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 7 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 116.25 max(relative change in state) = - n_iter = 2 J = 97.008 max(relative change in state) = 0.77802 n_iter = 3 J = 78.365 max(relative change in state) = 1.4285 n_iter = 4 J = 77.219 max(relative change in state) = 0.42656 n_iter = 5 J = 76.396 max(relative change in state) = 0.26686 n_iter = 6 J = 76.356 max(relative change in state) = 0.43971E-01 n_iter = 7 J = 76.246 max(relative change in state) = 0.13190 n_iter = 8 J = 76.302 max(relative change in state) = 0.10987 n_iter = 9 J = 76.213 max(relative change in state) = 0.49915E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 7 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 8 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 8 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 123.06 max(relative change in state) = - n_iter = 2 J = 102.91 max(relative change in state) = 0.74470 n_iter = 3 J = 80.806 max(relative change in state) = 2.4036 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 8 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 9 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 9 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 79.594 max(relative change in state) = - n_iter = 2 J = 66.829 max(relative change in state) = 0.71209 n_iter = 3 J = 56.162 max(relative change in state) = 1.5871 n_iter = 4 J = 58.344 max(relative change in state) = 1.0321 n_iter = 5 J = 55.778 max(relative change in state) = 0.78916 n_iter = 6 J = 55.698 max(relative change in state) = 0.47147E-01 n_iter = 7 J = 55.469 max(relative change in state) = 0.18739 n_iter = 8 J = 55.430 max(relative change in state) = 0.12787 n_iter = 9 J = 55.405 max(relative change in state) = 0.20702E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 9 to the file IT-1DVAR-05comp_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 10 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 10 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 53.314 max(relative change in state) = - n_iter = 2 J = 44.628 max(relative change in state) = 0.47040 n_iter = 3 J = 34.941 max(relative change in state) = 1.1266 n_iter = 4 J = 34.795 max(relative change in state) = 0.44032 n_iter = 5 J = 34.080 max(relative change in state) = 0.27292 n_iter = 6 J = 34.029 max(relative change in state) = 0.10151 n_iter = 7 J = 34.001 max(relative change in state) = 0.81186E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 7. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 10 to the file IT-1DVAR-05comp_bangle.1.nc. *** Running IDL to plot results IDL 8.8.2 (linux x86_64 m64). (c) 2022, L3Harris Geospatial Solutions, Inc. Licensed for use by: University of Maryland (MAIN) License: 94891 A new version is available: IDL 8.8.3 https://harrisgeospatial.flexnetoperations.com % Compiled module: PLOT_1DVAR. PLOT_1DVAR: Plotting increments for file_id: 05comp_bangle % Loaded DLM: NCDF. % Compiled module: NCDF_GETVAR. Processing scenario: BG_20090501000049_UNKN_U999_DMI_ % Compiled module: INTERPOL. Processing scenario: BG_20090501000102_UNKN_U999_DMI_ Processing scenario: BG_20090501000152_UNKN_U999_DMI_ Processing scenario: BG_20090501000623_UNKN_U999_DMI_ Processing scenario: BG_20090501000755_UNKN_U999_DMI_ Processing scenario: BG_20090501001552_UNKN_U999_DMI_ Processing scenario: BG_20090501001716_UNKN_U999_DMI_ Processing scenario: BG_20090501002017_UNKN_U999_DMI_ Processing scenario: BG_20090501002135_UNKN_U999_DMI_ Processing scenario: BG_20090501002245_UNKN_U999_DMI_ Found max difference [%] in observation scenarios: 999900.00 Found max difference [K] in temperature scenarios: -2.7038359 Found max difference [g/kg] in specific humidity scenarios: -0.60054958 Found max difference [hPa] in pressure scenarios: 5.4466105 Generating output image file ropp_1dvar_05comp_bangle_bangle.jpg % Compiled module: OPEN_JPGFILE. % Compiled module: CLOSE_JPGFILE. % Loaded DLM: JPEG. *** Finished IDL *** ropp_1dvar_05comp_bangle.jpg can be compared against ../data/ropp_1dvar_05comp_bangle_reference.jpg