*** Results log of t_1dvar_GRAS_05newop_bangle (1DVAR GRAS; new interp) *** ./../tools/ropp_1dvar_bangle -y ../data/IT-1DVAR-05_y.nc -b ../data/IT-1DVAR-05_b.nc --bg-corr ../data/IT-1DVAR-05_c.nc --obs-corr ../errors/ropp_ob_bangle_error_corr_247L.nc -c ../config/ecmwf_bangle_1dvar.cf -o IT-1DVAR-05newop_bangle.1.nc -new_op -d --------------------------------------------------------------------- ROPP Bending Angle 1D-Var --------------------------------------------------------------------- INFO (from ropp_1dvar_bangle): Reading configuration file ../config/ecmwf_bangle_1dvar.cf. INFO (from ropp_1dvar_bangle): Reading observation data for profile 1 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 1 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 84.086 max(relative change in state) = - n_iter = 2 J = 69.851 max(relative change in state) = 0.46472 n_iter = 3 J = 51.032 max(relative change in state) = 1.8969 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Writing 1DVar retrieval for profile 1 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 2 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 2 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 128.56 max(relative change in state) = - n_iter = 2 J = 108.12 max(relative change in state) = 0.90306 n_iter = 3 J = 89.165 max(relative change in state) = 1.3410 n_iter = 4 J = 86.978 max(relative change in state) = 0.45589 n_iter = 5 J = 90.974 max(relative change in state) = 1.3809 n_iter = 6 J = 86.762 max(relative change in state) = 1.1335 n_iter = 7 J = 86.706 max(relative change in state) = 0.14598E-01 n_iter = 8 J = 86.548 max(relative change in state) = 0.25369 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 2 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 3 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 3 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 52.579 max(relative change in state) = - n_iter = 2 J = 43.518 max(relative change in state) = 0.38820 n_iter = 3 J = 31.085 max(relative change in state) = 1.2665 n_iter = 4 J = 30.356 max(relative change in state) = 0.19125 n_iter = 5 J = 31.746 max(relative change in state) = 0.67556 n_iter = 6 J = 30.198 max(relative change in state) = 0.52142 n_iter = 7 J = 30.163 max(relative change in state) = 0.13777E-01 n_iter = 8 J = 30.018 max(relative change in state) = 0.11307 n_iter = 9 J = 29.983 max(relative change in state) = 0.72047E-01 n_iter = 10 J = 29.960 max(relative change in state) = 0.36713E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 10. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 3 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 4 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 4 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 149.65 max(relative change in state) = - n_iter = 2 J = 110.71 max(relative change in state) = 1.4643 n_iter = 3 J = 88.407 max(relative change in state) = 1.4326 n_iter = 4 J = 94.150 max(relative change in state) = 2.1277 n_iter = 5 J = 86.669 max(relative change in state) = 1.5291 n_iter = 6 J = 86.420 max(relative change in state) = 0.14738 n_iter = 7 J = 85.907 max(relative change in state) = 0.40699 n_iter = 8 J = 85.649 max(relative change in state) = 0.86757E-01 n_iter = 9 J = 85.776 max(relative change in state) = 0.36362 n_iter = 10 J = 85.530 max(relative change in state) = 0.14604 n_iter = 11 J = 85.514 max(relative change in state) = 0.59417E-01 n_iter = 12 J = 85.493 max(relative change in state) = 0.72927E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 12. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 4 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 5 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 5 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control removes 1 bending angle data points from the observations as their deviation from the background exceeds 10.0 times the expected (1-sigma) error. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 140.53 max(relative change in state) = - n_iter = 2 J = 112.62 max(relative change in state) = 1.1106 n_iter = 3 J = 85.572 max(relative change in state) = 3.8188 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 5 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 6 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 6 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 468.59 max(relative change in state) = - n_iter = 2 J = 345.88 max(relative change in state) = 9.7237 n_iter = 3 J = 245.49 max(relative change in state) = 3.9960 n_iter = 4 J = 243.09 max(relative change in state) = 1.2022 n_iter = 5 J = 240.90 max(relative change in state) = 0.69680 n_iter = 6 J = 240.48 max(relative change in state) = 0.23177 n_iter = 7 J = 239.90 max(relative change in state) = 0.30646 n_iter = 8 J = 239.40 max(relative change in state) = 0.14374 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 6 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 7 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 7 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 115.99 max(relative change in state) = - n_iter = 2 J = 96.769 max(relative change in state) = 0.77192 n_iter = 3 J = 77.939 max(relative change in state) = 1.4224 n_iter = 4 J = 76.716 max(relative change in state) = 0.42627 n_iter = 5 J = 75.972 max(relative change in state) = 0.30319 n_iter = 6 J = 75.910 max(relative change in state) = 0.70368E-01 n_iter = 7 J = 75.860 max(relative change in state) = 0.72340E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 7. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 7 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 8 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 8 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 122.90 max(relative change in state) = - n_iter = 2 J = 102.74 max(relative change in state) = 0.76572 n_iter = 3 J = 80.643 max(relative change in state) = 2.3500 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function is increasing INFO (from ropp_1dvar_cost): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 4. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 8 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 9 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 9 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 79.770 max(relative change in state) = - n_iter = 2 J = 66.973 max(relative change in state) = 0.71235 n_iter = 3 J = 56.215 max(relative change in state) = 1.5862 n_iter = 4 J = 58.473 max(relative change in state) = 1.0508 n_iter = 5 J = 55.835 max(relative change in state) = 0.80552 n_iter = 6 J = 55.758 max(relative change in state) = 0.50202E-01 n_iter = 7 J = 55.558 max(relative change in state) = 0.19885 n_iter = 8 J = 55.499 max(relative change in state) = 0.72005E-01 n_iter = 9 J = 55.475 max(relative change in state) = 0.50179E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the state vector did not change by more than 0.10000 relative to the assumed background errors for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 9. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 9 to the file IT-1DVAR-05newop_bangle.1.nc. INFO (from ropp_1dvar_bangle): Reading observation data for profile 10 from the file ../data/IT-1DVAR-05_y.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp WARNING (from ropp_fm_roprof2obs (1D bending angles)): Azimuth (of -0.1E+09 deg) out of range or missing. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Check input data and valid_range attributes. WARNING (from ropp_fm_roprof2obs (1D bending angles)): Continuing, as azimuth not needed directly for 1D bending angles. INFO (from ropp_1dvar_bangle): Reading background data for profile 10 from the file ../data/IT-1DVAR-05_b.nc. ... (from ropp_io_read_ncdf_get): 'start_time' and yr/mo/dy/hr/mn/sc/ms timestamps differ by 2.000 seconds (probably a leap-second issue) - using yr/../ms timestamp INFO (from ropp_qc_cutoff): 33 points rejected for being above maximum impact height of 50.0 km. INFO (from ropp_qc_bgqc): Background quality control lets all bending angle values pass. INFO (from ropp_1dvar_solve): Using background error covariance matrix for preconditioning. INFO (from ropp_1dvar_cost): Using absolute decrease of cost function and relative change of state vector as additional convergence criteria. n_iter = 1 J = 52.533 max(relative change in state) = - n_iter = 2 J = 43.970 max(relative change in state) = 0.47174 n_iter = 3 J = 34.496 max(relative change in state) = 1.1136 n_iter = 4 J = 34.374 max(relative change in state) = 0.45258 n_iter = 5 J = 33.629 max(relative change in state) = 0.27872 n_iter = 6 J = 33.583 max(relative change in state) = 0.10650 n_iter = 7 J = 33.556 max(relative change in state) = 0.63095E-01 INFO (from ropp_1dvar_cost): Convergence assumed to be achieved as the cost function did not change by more than 0.10000 for the last 2 iterations. INFO (from ropp_1dvar_solve): Minimization of cost function successfully finished (according to additional convergence criteria). Number of required iterations: 7. INFO (from ropp_1dvar_bangle): Appending 1DVar retrieval for profile 10 to the file IT-1DVAR-05newop_bangle.1.nc. *** Running IDL to plot results IDL 8.8.2 (linux x86_64 m64). (c) 2022, L3Harris Geospatial Solutions, Inc. Licensed for use by: University of Maryland (MAIN) License: 94891 A new version is available: IDL 8.8.3 https://harrisgeospatial.flexnetoperations.com % Compiled module: PLOT_1DVAR. PLOT_1DVAR: Plotting increments for file_id: 05newop_bangle % Loaded DLM: NCDF. % Compiled module: NCDF_GETVAR. Processing scenario: BG_20090501000049_UNKN_U999_DMI_ % Compiled module: INTERPOL. Processing scenario: BG_20090501000102_UNKN_U999_DMI_ Processing scenario: BG_20090501000152_UNKN_U999_DMI_ Processing scenario: BG_20090501000623_UNKN_U999_DMI_ Processing scenario: BG_20090501000755_UNKN_U999_DMI_ Processing scenario: BG_20090501001552_UNKN_U999_DMI_ Processing scenario: BG_20090501001716_UNKN_U999_DMI_ Processing scenario: BG_20090501002017_UNKN_U999_DMI_ Processing scenario: BG_20090501002135_UNKN_U999_DMI_ Processing scenario: BG_20090501002245_UNKN_U999_DMI_ Found max difference [%] in observation scenarios: 999900.00 Found max difference [K] in temperature scenarios: -2.7032829 Found max difference [g/kg] in specific humidity scenarios: -0.58965702 Found max difference [hPa] in pressure scenarios: 5.8128874 Generating output image file ropp_1dvar_05newop_bangle_bangle.jpg % Compiled module: OPEN_JPGFILE. % Compiled module: CLOSE_JPGFILE. % Loaded DLM: JPEG. *** Finished IDL *** ropp_1dvar_05newop_bangle.jpg can be compared against ../data/ropp_1dvar_05newop_bangle_reference.jpg